USB 10 IN / 4 OUT audio interface

FOCUSRITE presents Clarett + 2pre

The interfaces of the Clarett + series are distinguished from the previous series for new converters and for a more powerful dynamic range, appreciable in particular on the LINE outputs - equal to 124db (118 in previous models) - And on the headphone outputs (+ 3DB compared to the previous models). Clarett + 2 pre can be fed directly via USB-C o Connecting to the current with the adapter included in the package.
The two analogue inputs can be used for recording of microphone sources (XLR with Phantom 48V), LINE, or for the direct connection of guitars and electric bass when the "Instrument" function is activated, which makes pin on JFET High impedance and the extensive frequency response, which will allow you to get the best from your picks-up. The two microphone preamplifiers integrated in the Clarett + 2 pre focusritis allow you to capture every detail of the audio sources and thanks to the high headroom and a self-Noise reduced to the minimum terms avoid the occurrence of artifacts and distortions. Integrated and can be activated individually on each preamplified input, the Air circuit emulates the behavior of the classic and appreciated ISA110 preamplifier implemented in the iconic FocusRite Studio Console.
Fully analog and controlled by relay, the Air mode, once activated on the individual PEAMPs, varies the impedance of the microphone inputs from the 6.2k Ohm by default to the 2.1k Ohm by introducing the physiological change in the response in Particularly appreciable frequency when using dynamic microphones (tape or mobile coil), vintage, but not only. The Air mode also adds a boost (about 4DB) on the medium / high frequencies, while introducing a slight saturation on harmonics. The air that touch in more than you need to revive your professional recordings.

• USB 10 IN / 4 OUT audio interface
• 2 analog MIC / LINE inputs
• Adat Input Toslink
• MIDI IN & MIDI OUT doors on DIN 5PIN
• Conversion to and from 24bit / 192khz
• Included in the package: 2x USB cables (one with USB connector-A, one with USB connector-C, power supply)
• Size: 55 x 210 x 161mm
• Weight: 1, 1kg